1.NC Bottom Glue Spray Section
Dimensions (mm): 4000×1350×850
Structure: Welded Work of U beam and Steel Sheet
Drive: 2.2kw frequency modulation motor rated 0~32 revolutions/min
Transmission: reciprocation chain
Spray motor: electric motor 0.06kw
Adsorption deducting device: 1 set
Air compressor: 1 set, 0.9 m3
Pressure glue tank: 1 set, pressure: 0.1-0.6MPa
Glue gun jet: 4 sets
Manual glue spray gun: 5 sets
Spray gun stand: 1 set

2.NC Sand Spray Chamber: 1 set
Dimensions: 3000*1850*700mm
Structure: Welded Work of U beam and Steel SheeetDuplex chain transmission driven by the same motor for glue spray section
Duplex chain transmission
Sand tank: 1, 550*600*500mm
Automatic Lift: 1 set. Lift height: 1.9 meter. Power: 300kg/hour
Sand jet: 4 set

3. First baking oven: 1 set
Dimensions: 25×0.8×1.2M
Welded structure with carbon steel
Oven chamber: sandwich walled chamber with temperature isolation between 1 mm carbon steel sheet
Automatic temperature controller: 2 sets. Controlling range: 0-160℃
Infrared fluorescent tube: 50 pcs
Transmission: reciprocation chain
Cooling device: 1 set

4.NC face glue spray equipment
Dimension: 3000×850×700
Welded structure with carbon steel
Automatic glue spray gun: 2 sets
Automatic spray assembly: 1 set. Pressure range: 0.1-0.6 MPa
Adsorption deducting device: 1 set
Manual glue pray gun: 5 sets

5.Secondary baking chamber
Dimension: 30000×850×700 mm
Welded structure with carbon steel Oven chamber: sandwich walled chamber with temperature isolation between 1 mm carbon steel sheet
Automatic temperature controller: 2 sets. Controlling range: 0-160℃
Infrared fluorescent tube: 50 pcs
Transmission: reciprocation chain of 30 meter distance.
Cooling device: 1 set
Marking device: automatic marking machine: 1 set.
General electrical control cabinet: 1 set
Productive capacity: 1500 pcs /8h shift
Overall power: 113 kw
 
Installation Picture 

stone coated machine test